Revolving Doors
W.D.S Stock standard size revolving doors to give fast turn around time and deliver to site in two-three weeks. Custom made to any size within below standard dimensions are available. Canopy designs and dimensions are limitless allowing architect the freedom to create a stylish entrance.
Mat and Rim Details
12mm Rubber mat with stainless steel rim.
Stainless steel rim fitted by main contractor prior to door installation.
Top of rim to be set level with FFL
Screed to be laid level with top of rim to outer edge
On completion Revolving door fitted to finished floor
Note: Distance from internal drum radius to Outer mat rim radius=55mm
If required drainage from mat well to be arranged by main contractor.
Locking Options
Adams Rite 1870 Cylinder Operated Flush bolt
Installed at top of door leading edge
Operated by keyed barrels or thumb turns
Barells maybe suited to suit
May be locked internally or on outer doors
Horse hair weather seal
Detailed testing proved double seals provided greater acoustic qualities
Increased qualities by installation of 2x4mm horse hair seals as opposed to the common 1x6mm seal
Greater life achieved by installation of 2 seals.